JOSEPH C. SPERO, United States Magistrate Judge.
At the close of Defendants' case and again at the close of evidence, Volterra brought motions seeking judgment as a matter of law as to Defendants' obviousness defense (hereinafter, the "Plaintiff's Obviousness JMOL Motions"), pursuant to Rule 50(a)(1) of the Federal Rules of Civil Procedure. Defendants, in turn, brought a motion for judgment as a matter of law on their obviousness defense at the close of Plaintiff's case (hereinafter, "Defendants' Obviousness JMOL Motion"). On the record of the trial, the Court GRANTED Plaintiff's Obviousness JMOL Motions
At trial, Defendants presented two obviousness combinations. First, as to Claims 26 and 34 of the '264 patent and Claims 22 and 24 of the '522 patent (the Metalized Pad Claims), Defendants relied on the following prior art references in support of their obviousness defense: 1) "A Low-Voltage CMOS DC-DC Converter for a Portable Battery-Operated System," IEEE (1994) by Stratakos et al. ("Stratakos 1994"); 2) "Chip on Board Technologies for Multichip Technologies," by John Lau published by Chapman & Hall in 1994 ("Lau 1994"); and 3) U.S. Patent No. 5,412,239 to Williams ("Williams"). Second, as to Claims 9, 11 and 16-19 of the '522 patent (the Flip Chip Claims), Defendants presented evidence that these claims were obvious in light of Stratakos 1994 and Lau 1994.
With respect to the Metalized Pad Claims, Defendants presented the testimony of their expert, Dr. Fair, to show that all of the elements of these claims were disclosed in the prior art. Dr. Fair testified that Stratakos 1994 disclosed the following claim elements: 1) "an integrated chip with a power switch for a voltage regulator fabricated thereon," 5/10/11 Transcript at 375-376; 2) "a substrate having a first plurality of doped regions and a second plurality of doped regions, the first and second pluralities of doped regions arranged in a first alternating pattern," 5/10/11 Transcript at 376-377; and 3) "a gate region on the substrate," 5/10/11 Transcript at 384-385. Dr. Fair further testified that Lau 1994 disclosed a "metalized pad" and that Dr. Szepesi agreed with this opinion. 5/10/11 Transcript at 392.
Dr. Fair testified that Williams disclosed the limitation requiring an "array" of pads arranged in an "alternating pattern." 5/10/11 Transcript at 388.
Dr. Fair testified that the "array" of pads arranged in an "alternating pattern" was disclosed in Figure 1 of Williams. 5/10/11 Transcript at 386. He testified that although Figure 1 did not disclose pads, it did show an alternating pattern of doped regions with contacts and it would be obvious to a person of ordinary skill in the art that there would be pads on top of the doped regions. 5/10/11 Transcript at 436-438.
Dr. Fair testified that the "solder ball" element of claim 34 of the '264 Patent was disclosed in Lau 1994. 5/10/11 Transcript at 407.
With respect to the Flip Chip Claims, Dr. Fair testified that Stratakos 1994 disclosed all of the elements of these claims except flip chip. 5/10/11 Transcript at 308-343. Drs. Fair and Garrou also offered testimony that Stratakos 1994 disclosed "chip-on-board" packaging, which Lau 1994 taught included three types of packaging, namely, wire bonding, tape automated bonding ("TAB"), and flip chip. 5/10/11 Transcript at 352-356; 5/11/11 Transcript at 614-617. Dr. Fair testified further that a person of ordinary skill in the art would have had a reason to combine Stratakos 1994 with Lau 1994 to eliminate the problem of resistance discussed in Stratakos 1994. 5/10/11 Transcript at 365.
In its Obviousness JMOL Motions, Volterra argued that judgment should be entered in its favor pursuant to Rule 50(a) of the Federal Rules of Civil Procedure because the jury could not reasonably find by clear and convincing evidence that either the Metalized Pad Claims or the Flip Chip Claims are obvious in light of the prior art cited above, based on the evidence and testimony presented at trial. Volterra further moved to strike Dr. Fair's opinions addressing the Williams patent and whether a person skilled in the art would have thought it obvious to combine Stratakos 1994 with flip chip packaging.
With respect to the Metalized Pad Claims, Volterra argued that Defendants failed to present sufficient evidence to make a prima facie showing that the prior art disclosed a "pad" or an "array" of pads arranged in an "alternating pattern." To the extent that Defendants presented testimony by their expert, Dr. Fair, that Williams disclosed these limitations, Volterra asserted that this testimony was insufficient because it was contradictory and confusing, as well as being inconsistent with the specification and figures of Williams. For this reason, Volterra also requested that this testimony be stricken.
Volterra further argued that to the extent Williams did not disclose a "pad," the claim limitation requiring an "array" of pads arranged in an alternating pattern also was not taught by Williams. Volterra pointed out that Dr. Fair conceded at trial that Figure 1 does not show an array of pads arranged in an alternating pattern but rather, shows an array of metal contacts. At best, Volterra argued, Williams teaches an alternating pattern of doped regions with contacts, which would not be sufficient to support a jury verdict in Defendants' favor on this question. In addition, as to Claim 34 of the '264 patent, Volterra argued that the only evidence that the solder balls taught in Lau 1994 were "interleaved," as required under that claim, came from the array of pads arranged in an alternating pattern that Defendants asserted was taught by Williams. Thus, to the extent that Williams did not disclose the alternating pattern of pads, Defendants also failed to meet their burden as to the interleaved solder ball limitation.
Finally, Volterra argued that the obviousness defense failed as a matter of law as to the Metalized Pad Claims because Defendants failed to present any evidence addressing why a person of ordinary skill in the art would combine Williams with Stratakos 1994 or Lau 1994.
As to the Flip Chip Claims, Volterra argued that Defendants' evidence was insufficient because: 1) Defendants' experts admitted that the definition of "chip on board" is unclear and therefore Defendants' evidence established, at best, that a person of ordinary skill in the art may have considered using flip chip packaging as one of the three possible types of chip on board bonding methods when viewing Stratakos 1994; 2) the testimony offered by Dr. Fair that it would have been obvious to combine flip chip packaging with a power switch for a voltage regulator was not reliable because he improperly failed to consider the known drawbacks of such a combination; and 3) the testimony of Dr. Garrou as to motivation to combine was baseless because he had no knowledge of voltage regulators or whether the alleged solutions to known drawbacks of combining would work in a voltage regulator.
Defendants asserted in their opposition brief and in their own Obviousness JMOL Motion that judgment should be entered in their favor on the obviousness defenses because the evidence of obviousness presented at trial was overwhelming and
With respect to the Metalized Pad Claims, Defendants contended that they presented sufficient evidence at trial to support a jury finding that Williams disclosed "pads" and "an `array' of pads or pad-like metal contacts `arranged in an alternating pattern,'" Docket No. 1561 at 4, and that Lau 1994 and Stratakos 1994 disclosed the remaining limitations of Claims 22 and 24 of the '522 patent and Claim 26 and 34 of the '264 Patent. In particular, they cited Dr. Fair's testimony that Figure 12 of Williams disclosed a pad and Figure 1 taught an array of pads arranged in an alternating pattern. With respect to Claim 34 of the '264 patent, Defendants argued that the interleaved solder ball limitation was met because Lau 1994 disclosed the solder balls while the interleaved arrangement of the solder balls would have been obvious in light of the array of metal contacts taught by Williams.
With respect to the Flip Chip Claims, Defendants asserted that they had presented considerable and unrebutted evidence of obviousness based on the testimony of Drs. Fair and Garrou that: 1) Stratakos 1994 contained all but one element of these claims (use of flip chip packaging); 2) Lau 1994 disclosed this remaining element; and 3) the two references would be natural to combine. Defendants argued that Volterra's arguments concerning the reliability of the testimony of Drs. Fair and Garrou regarding the motivation to combine were the same ones that the Court had rejected in connection with Volterra's Motions in Limine Nos. 2 and 3 and should be rejected again for the same reasons.
Defendants also argued that although Volterra presented evidence of secondary considerations such as commercial success, copying, long-felt need and industry praise and/or skepticism, in an effort to rebut Defendants' prima facie case of obviousness, this evidence was not sufficient to create a jury question because it did not establish a nexus between the claimed features of the asserted patents and the secondary considerations of nonobviousness.
On the trial record, the Court denied Volterra's request that Dr. Fair's testimony be stricken as unreliable on the grounds that it had already ruled on this request when it denied Volterra's Motion in Limine No. 3. The Court also ruled, based on careful consideration of the evidence presented a trial and cited by the parties in their briefs, that fact questions remained as to Defendants' obviousness defense as it related to the Flip Chip Claims and on that basis denied both Plaintiff's and Defendants' JMOL motions as to that defense. Finally, the Court held that Volterra was entitled to judgment as a matter of law that Defendants' obviousness defense failed as to the Metalized Pad Claims. The Court sets forth below the reasons for this last ruling.
Pursuant to Rule 50 of the Federal Rules of Civil Procedure, a court may grant a motion for judgment as a matter of law ("JMOL") against a party on a claim or issue where the party has been "fully heard on [that] issue during a jury trial" and the court finds that a "reasonable jury would not have a legally sufficient evidentiary
The standard regarding obviousness is set forth in 35 U.S.C. § 103(a), which provides, in relevant part, as follows:
35 U.S.C. § 103(a). In Graham v. John Deere Co., the Supreme Court instructed courts to address the question of obviousness against the "background" of three inquiries: 1) the scope and content of the prior art; 2) differences between the prior art and the claims at issue; and 3) the level of ordinary skill in the pertinent art. 383 U.S. 1, 17, 86 S.Ct. 684, 15 L.Ed.2d 545 (1966). In addition, under Graham courts are to consider "secondary considerations" that may be relevant to obviousness, such as "commercial success" and "long felt but unsolved needs." Id. In order to be relevant, there must be a nexus between these secondary considerations and the claimed invention. Ormco Corp. v. Align Tech., Inc., 463 F.3d 1299, 1311-1312 (Fed.Cir. 2006) (holding that commercial success was not relevant to obviousness because it was due to unclaimed features and features that were not novel).
Obviousness must be proved by clear and convincing evidence. Procter & Gamble Company v. Teva Pharmaceuticals USA, Inc., 566 F.3d 989, 994 (Fed.Cir. 2009). "In an obviousness determination, some evidentiary support must be offered beyond an expert's conclusory opinion." Rhone-Poulenc Agro, S.A. v. DeKalb Genetics Corp., 272 F.3d 1335, 1358 (Fed.Cir. 2001) (cert. granted, judgment vacated and remanded on other grounds, 538 U.S. 974, 123 S.Ct. 1828, 155 L.Ed.2d 662 (2003) and opinion modified and reinstated, 345 F.3d 1366 (2003)); see also KSR Intern. Co. v. Teleflex, Inc., 550 U.S. 398, 418, 127 S.Ct. 1727, 167 L.Ed.2d 705 (2007) ("[R]ejections on obviousness grounds cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness") (quoting In re Kahn, 441 F.3d 977, 988 (Fed.Cir.2006)). "When an expert opinion is not supported by sufficient facts to validate it in the eyes of the law, or when indisputable record facts contradict or otherwise render the opinion unreasonable, it cannot support a jury's verdict." Brooke Group Ltd. v. Brown & Williamson Tobacco Corp., 509 U.S. 209, 242, 113 S.Ct. 2578, 125 L.Ed.2d 168 (1993) (finding that expert testimony was not sufficient to defeat JMOL because expert's opinion was not supported by sufficient facts to support jury verdict); see also Lear Automotive
The Court found at the close of evidence that the evidence and testimony presented by Defendants at trial was insufficient to support a jury verdict in Defendants' favor as to the Metalized Pad Claims. The Court's conclusion is based on the fact that although Dr. Fair offered conclusory testimony that Williams disclosed both a "pad" and an "array" of pads arranged in an alternating pattern, the specific testimony offered by Dr. Fair in support of these opinions contradicted his own prior testimony, the Court's claim construction and the specification and figures of the Williams patent.
Dr. Fair relied on Figure 12 of Williams to show a pad, but it is clear from the figure and the Williams specification that the elements that he identified, Elements 90 and 93, cannot be a pad because they are beneath what is clearly identified as the second metal layer. Similarly, the passivation layer identified by Dr. Fair, Element 92, cannot be the top passivation layer, as required by the Court's claim construction, because it is under the second metal layer. Indeed, Dr. Fair recognized that the second metal layer could not be located over the pad, explaining in connection with Slide 116 that the pad is an opening in the top passivation layer, which is located over the top metal layer. Further, Dr. Fair conceded that in order to find a pad in Figure 12, a person of ordinary skill in the art would have to ignore the second metal layer depicted in that figure. He did not, however, offer any testimony explaining why such a person would read Williams in this manner and he acknowledged that Williams contained no such teaching.
Likewise, Dr. Fair relied on Figure 1 to show an array of pads arranged in an alternating pattern even though he conceded that Figure 1 depicted an array of metal contacts, rather than pads, arranged in an alternating pattern. Because Williams does not disclose pads, however, Dr. Fair's testimony is insufficient to support a finding by the jury that Figure 1 discloses an "array of pads." Defendants essentially conceded this point in their Opposition brief, arguing that "Dr. Fair clearly testified that Williams discloses an array of metal contacts—whether they are `pads' within the meaning of the Court's construction of that term or not." Docket No. 1561 at 7. Although Dr. Fair suggested that a person of skill in the art would simply know that Figure 1 disclosed an "array" of pads in an alternating pattern, he did not specifically identify any prior art that would have led a person of ordinary skill in the art to read Williams in this manner.
Because Defendants failed to show that all the limitations of the Metalized Pad Claims were present in the prior art, Volterra is entitled to JMOL as to Defendants' obviousness defense relating to these claims. See Fresenius USA, Inc. v. Baxter International, Inc., 582 F.3d 1288, 1300 (Fed.Cir.2009) (holding that district court properly granted the plaintiff's JMOL motion as to invalidity defense because party challenging patent's validity failed to present evidence that all of the elements of the claims that were at issue were present in the prior art). The Court, therefore, does not reach the question of whether the evidence was sufficient for a jury to reasonably conclude that there was a motivation to combine.
For the reasons stated above, Volterra's Obviousness JMOL Motions are GRANTED as to the Metalized Pad Claims and DENIED in all other respects. Defendants' Obviousness JMOL Motion is DENIED.
IT IS SO ORDERED.
