Filed: Mar. 28, 2013
Latest Update: Mar. 28, 2017
Summary: RECOMMENDED FOR FULL-TEXT PUBLICATION Pursuant to Sixth Circuit I.O.P. 32.1(b) File Name: 13a0083p.06 UNITED STATES COURT OF APPEALS FOR THE SIXTH CIRCUIT _ NATIONAL TRUCK EQUIPMENT ASSOCIATION, X Petitioner, - - - - No. 09-3812 v. , > - - NATIONAL HIGHWAY TRAFFIC SAFETY Respondent. N- ADMINISTRATION, On Petition for Review from the National Highway Traffic Safety Administration. No. NHTSA-2009-0093. Argued: November 29, 2012 Decided and Filed: March 28, 2013 Before: DAUGHTREY, COLE, and GIBBONS
Summary: RECOMMENDED FOR FULL-TEXT PUBLICATION Pursuant to Sixth Circuit I.O.P. 32.1(b) File Name: 13a0083p.06 UNITED STATES COURT OF APPEALS FOR THE SIXTH CIRCUIT _ NATIONAL TRUCK EQUIPMENT ASSOCIATION, X Petitioner, - - - - No. 09-3812 v. , > - - NATIONAL HIGHWAY TRAFFIC SAFETY Respondent. N- ADMINISTRATION, On Petition for Review from the National Highway Traffic Safety Administration. No. NHTSA-2009-0093. Argued: November 29, 2012 Decided and Filed: March 28, 2013 Before: DAUGHTREY, COLE, and GIBBONS,..
More
RECOMMENDED FOR FULL-TEXT PUBLICATION
Pursuant to Sixth Circuit I.O.P. 32.1(b)
File Name: 13a0083p.06
UNITED STATES COURT OF APPEALS
FOR THE SIXTH CIRCUIT
_________________
NATIONAL TRUCK EQUIPMENT ASSOCIATION, X
Petitioner, -
-
-
-
No. 09-3812
v.
,
>
-
-
NATIONAL HIGHWAY TRAFFIC SAFETY
Respondent. N-
ADMINISTRATION,
On Petition for Review from the
National Highway Traffic Safety Administration.
No. NHTSA-2009-0093.
Argued: November 29, 2012
Decided and Filed: March 28, 2013
Before: DAUGHTREY, COLE, and GIBBONS, Circuit Judges.
_________________
COUNSEL
ARGUED: Bruce E. Alexander, WEINER, BRODSKY, SIDMAN & KIDER, PC,
Washington, D.C., for Petitioner. H. Thomas Byron III, UNITED STATES
DEPARTMENT OF JUSTICE, Washington, D.C., for Respondent. ON BRIEF: Bruce
E. Alexander, WEINER, BRODSKY, SIDMAN & KIDER, PC, Washington, D.C., for
Petitioner. H. Thomas Byron III, Michael P. Abate, UNITED STATES DEPARTMENT
OF JUSTICE, Washington, D.C., for Respondent.
_________________
OPINION
_________________
COLE, Circuit Judge. This case arises from a longstanding dispute between the
National Highway Traffic Safety Administration (NHTSA) and the National Truck
Equipment Association (NTEA). NHTSA is a federal agency within the Department of
Transportation that writes and enforces safety standards for motor vehicles. NTEA is
1
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 2
a trade organization representing more than one thousand manufacturers who customize
bodies for special-purpose commercial vehicles. In 2005, NHTSA initiated a rulemaking
proceeding at Congress’s behest to upgrade the safety standard establishing strength
requirements for passenger compartment roofs in certain vehicles. NHTSA proposed,
among other things, extending the scope of the safety standard to include a previously
unregulated class of vehicles, many of which are produced by NTEA’s members. NTEA
resisted this proposal throughout the process, but to no avail. In 2009, NHTSA
promulgated Federal Motor Vehicle Safety Standard (FMVSS) No. 216a, which NTEA
now challenges on several grounds. For the reasons that follow, we deny the petition for
review.
I.
A.
Congress passed the National Traffic and Motor Vehicle Safety Act of 1966
(Safety Act) with the express purpose of “reduc[ing] traffic accidents and deaths and
injuries to persons resulting from traffic accidents.” Pub. L. No. 89-563, 80 Stat. 718
(codified at 49 U.S.C. §§ 30101-30183 (2010)). Toward this end, Congress directed the
Secretary of Transportation to prescribe safety standards for motor vehicles, see
49 U.S.C. § 30111(a), a statutory duty the Secretary has delegated to NHTSA since
1980, see 49 C.F.R. § 501.2 (2010). NHTSA’s standards serve as mandatory
performance benchmarks for motor vehicles and their constituent parts. See 49 U.S.C.
§ 30112(a)(1). As such, manufacturers must certify that the vehicles they produce
comply with each standard that applies. See id. § 30115.
While most of NHTSA’s standards are aimed at single-stage manufacturers of
non-commercial vehicles—the kind most of us drive everyday—this group is not the
only one subject to regulation. The Safety Act also applies to final-stage
manufacturers—who complete vehicles assembled in two or more stages—and
alterers—who make modifications to already-completed vehicles prior to sale. See id.
§ 30115(b). NTEA challenges FMVSS No. 216a only as it relates to the latter two
groups.
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 3
A little background is in order here. Final-stage manufacturers are for the most
part small companies that supply a market for custom-made work trucks driven by end-
users with specialized needs, like contractors and utility companies. See generally Nat’l
Truck Equip. Ass’n v. Nat’l Highway Traffic Safety Admin., 919 F.2d 1148, 1150-51
(6th Cir. 1990) (describing the market for multi-stage vehicles in considerable detail).
A final-stage manufacturer filling an order usually begins with a truck chassis produced
by a major manufacturer such as Ford or General Motors (GM). Oftentimes the chassis
will consist, in its entirety, of an engine, transmission, axles, wheels, and a completed
passenger compartment with bare frame rails in the rear (where the bed would be on a
non-commercial truck). This form of chassis is known as a “chassis-cab,” see 49 C.F.R.
§ 567.3, and it is functionally a work-in-progress. A final-stage manufacturer then
attaches a service body or other specialized equipment to complete the vehicle and meet
the end-user’s specific needs. One familiar example might be adding a flat bed and a
winch to complete a tow truck.
Like other manufacturers, final-stage manufacturers are required to certify that
the vehicles they complete are in compliance with all applicable safety standards.
49 U.S.C. § 30115(a)-(b). The Safety Act provides two avenues to do this. The most
straightforward avenue is to independently certify compliance. See id. § 30115(b)(2).
Taking this route generally entails conducting whatever test is specified in the relevant
standard—e.g., crashing a vehicle into a wall. Because the cost of conducting such tests
is almost always insurmountable for small companies, this is not a popular option among
final-stage manufacturers. Thankfully Congress anticipated this problem and included
a second avenue for final-stage manufacturers to certify compliance that amounts to
piggy-backing. See id. § 30115(b)(1). Final-stage manufacturers may rely on an initial
manufacturer’s certification statement that the incomplete vehicle it delivered conforms
to applicable standards—in other words, they are allowed to “pass through” the initial
certification rather than certifying independently. Id. Both the initial manufacturer and
the final-stage manufacturer of a vehicle have some responsibility in this scenario.
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 4
Pass-through certification is at the heart of the dispute between NTEA and
NHTSA. This avenue is made possible because initial manufacturers of chassis-cabs are
required to deliver their products with an incomplete vehicle document (IVD) that lists
the applicable safety standards “in effect at the time of manufacture.” 49 C.F.R.
§ 568.4(a)(7). For each standard, initial manufacturers must supply one of three kinds
of statements regarding an incomplete vehicle’s compliance. Id. A “Type 1” statement
certifies “that the vehicle when completed will conform to the standard if no alterations
are made in identified components of the incomplete vehicle.” Id. § 568.4(a)(7)(i). A
“Type 2” statement provides “specific conditions of final manufacture under which the
manufacturer specifies that the completed vehicle will conform to the standard.” Id.
§ 568.4(a)(7)(ii). Finally, a “Type 3” statement simply notes that “conformity with the
[applicable] standard cannot be determined based upon the components supplied on the
incomplete vehicle, and that the incomplete vehicle manufacturer makes no
representation as to conformity with the standard.” Id. § 568.4(a)(7)(iii). These
statements specify the restrictions and conditions that an initial manufacturer places on
the certification of a completed vehicle built on its chassis. A final-stage manufacturer
need only certify “that it has complied with the specifications set forth” in an IVD to
satisfy its duty under the Safety Act. 49 U.S.C. § 30115(b)(1); see also 49 C.F.R.
§ 567.5(d)(1) (noting that final-stage manufacturers are in the clear if they “complete the
vehicle in accordance with the prior manufacturers’ IVD”).
The Safety Act—and the attendant duty to certify—also applies to alterers. They
are generally small companies that make aftermarket modifications to single-stage
vehicles before those vehicles are first sold to end-users. See 49 C.F.R. § 567.3.
Alterers are distinct from final-stage manufacturers insofar as vehicles arrive to alterers
fully built; that is, the vehicles arrive with load-bearing and other specialized equipment
already attached rather than as an incomplete chassis-cab. For this reason, alterers face
a different certification regime under the Safety Act, one in which pass-through
certification is irrelevant. Single-stage manufacturers are required to certify that their
completed vehicles are compliant with all applicable safety standards. See 49 U.S.C.
§ 30115(a). Thus, there is no need to issue an IVD when delivering such vehicles to
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 5
alterers or anyone else. Alterers do not run afoul of the Safety Act so long as they avoid
making changes that take the completed vehicle out of conformity with any particular
standard. See 49 C.F.R. § 567.7(a)(1).
B.
The one and only safety standard relevant to this petition is FMVSS No. 216a,
which establishes strength requirements—known as “roof crush resistance”—for
passenger compartment roofs in certain vehicles. See id. § 571.216a. The standard
regulates roof pillars and roof materials to improve occupant safety in the event of a
rollover. NHTSA promulgated the first iteration of this standard in 1971 as FMVSS No.
216, see Motor Vehicle Safety Standards, 36 Fed. Reg. 23,299 (Dec. 8, 1971), and
amended it in 1991, see Roof Crush Resistance, 56 Fed. Reg. 15,510 (Apr. 17, 1991).
In 2005, Congress directed NHTSA to revisit the roof crush resistance standard
once again. See 49 U.S.C. § 30128(a), (d); see also Safe, Accountable, Flexible,
Efficient Transportation Equity Act: A Legacy for Users, Pub. L. No. 109-59, Title X,
§ 10301(a), (d), 119 Stat. 1144, 1939 (Aug. 10, 2005). The statute mandated new
rulemaking proceedings, including one to “establish performance criteria to upgrade
Federal Motor Vehicle Safety Standard No. 216 relating to roof strength for driver and
passenger sides.” 49 U.S.C. § 30128(d). This specific mandate came as part of a
broader effort to promulgate new “rules or standards that will reduce vehicle rollover
crashes and mitigate deaths and injuries associated with such crashes for motor vehicles
with a gross vehicle weight rating of not more than 10,000 pounds.” Id. § 30128(a).
Less than a month later, NHTSA heeded Congress’s call and issued a Notice of
Proposed Rulemaking (NPRM) regarding the roof crush resistance standard. 70 Fed.
Reg. 49,223 (Aug. 23, 2005). The NPRM set forth three significant changes intended
to upgrade existing FMVSS No. 216, one of which raised the weight limit for vehicles
subject to the standard from a Gross Vehicle Weight Rating (GVWR) of 6,000 pounds
to 10,000 pounds. Id. at 49,223-24. This particular change promised to have a large
impact on many multi-stage and altered vehicles not subject to the existing standard. In
an effort to mitigate the burden of demonstrating compliance with the new standard,
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 6
NHTSA stipulated that certain multi-stage vehicles could certify to an easier standard
(FMVSS No. 220) but excluded those built on chassis-cabs because their manufacturers
could take advantage of pass-through certification. Id. at 49,235.
In 2009, after considering public comments from numerous groups, NHTSA
modified its proposals and promulgated the final rule—designated as FMVSS No.
216a—which is the subject of this petition. See Roof Crush Resistance, Phase-In
Reporting Requirements, 74 Fed. Reg. 22,348 (May 12, 2009); see also Final Rule,
Correcting Amendment, 75 Fed. Reg. 17,604 (Apr. 7, 2010). NTEA draws our attention
to just one aspect of the final rule: NHTSA’s decision to extend the scope of the roof
crush resistance standard to include vehicles with a GVWR up to 10,000 pounds. See
74 Fed. Reg. at 22,348-49; see also 49 C.F.R. § 571.216a. At the same time that
NHTSA decided to extend the scope of the standard, it made two important concessions
regarding heavier vehicles vis-a-vis its position in the NPRM. First, the final rule only
requires that roofs on heavier vehicles be able to withstand an amount of force equal to
1.5 times the vehicle’s weight—that is, half the strength-to-weight ratio imposed on
vehicles with a GVWR of 6,000 pounds or less. See 74 Fed. Reg. at 22,348-49; see also
49 C.F.R. § 571.216a, S5.2. Second, the final rule only applies to multi-stage vehicles
“built on either a chassis cab or an incomplete vehicle with a full exterior van body.”
See 74 Fed. Reg. at 22,349; see also 49 C.F.R. § 571.216a, S3.1(a)(4). NHTSA also
provided plenty of lead time in the final rule. It decided to phase-in the upgraded roof
crush resistance standard over a lengthy period, giving manufacturers until September
2016 to begin certifying already-regulated vehicles and an extra year for newly regulated
vehicles. See 74 Fed. Reg. at 22,348; see also 49 C.F.R. § 571.216a, S8.8, S9(b).
C.
These concessions notwithstanding, one group that remains concerned about the
impact of FMVSS No. 216a is NTEA, an association counting among its members many
final-stage manufacturers and alterers who work on vehicles with GVWRs between
6,001 pounds and 10,000 pounds. These members face the daunting task of
demonstrating compliance with the roof crush resistance standard for the first time.
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 7
NTEA voiced their concerns throughout the rulemaking process in response to NHTSA’s
many requests for comments. See, e.g., Further Response to Comments, 75 Fed. Reg.
17,590 (Apr. 7, 2010). When those concerns were not addressed to their satisfaction in
the final rule, NTEA immediately filed this petition for review. We granted a motion to
hold the litigation in abeyance while NHTSA responded to further NTEA comments
regarding compliance with FMVSS No. 216a.
In 2010, NHTSA published its response to NTEA’s core concern: that
pass-through certification did not provide a realistic avenue for final-stage manufacturers
using chassis-cabs to comply with the upgraded roof crush resistance standard. See id.
NTEA had requested that NHTSA completely exclude its members from FMVSS No.
216a rather than leave them subject to its requirements with no way to certify
compliance. See id. at 17,594. But NHTSA rejected both the premise and the
conclusion. NHTSA noted that final-stage manufacturers had been using pass-through
certification to successfully comply with FMVSS No. 216 and similar standards for
decades. Id. at 17,599. NHTSA thus determined that final-stage manufacturers could
use this method to demonstrate compliance with the upgraded standard in FMVSS No.
216a without incurring significant new costs. Id. at 17,604. NHTSA also determined
that excluding all multi-stage vehicles from FMVSS No. 216a would be inconsistent
with Congress’s cardinal desire to improve occupant safety during rollovers. See
49 U.S.C. § 30128(a).
Immediately following NHTSA’s response, NTEA filed a petition for
reconsideration, which NHTSA predictably denied. See Response to Petition for
Reconsideration, 76 Fed. Reg. 15,903 (Mar. 22, 2011). The parties continued to trade
proposals regarding amendments to FMVSS No. 216a. But a mutually agreeable
solution proved elusive. When the settlement process finally broke down, this litigation
recommenced.
NTEA now challenges NHTSA’s adoption of FMVSS No. 216a insofar as it
extends the scope of the roof crush resistance standard to include vehicles with a GVWR
up to 10,000 pounds. NTEA asserts that NHTSA’s decision is arbitrary and capricious
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 8
and that the final rule fails to satisfy the minimum substantive criteria prescribed in the
Safety Act. In addition, NTEA asserts that NHTSA improperly delegated its statutory
authority. By contrast, NHTSA maintains that it conducted an appropriately thorough
rulemaking, involving input from many groups and numerous modifications to its
proposals, and ultimately promulgated a final rule that conforms to the language of the
Safety Act.
II.
Before we reach the merits, we begin by identifying the appropriate standards of
review. This is not always an easy task, especially in the administrative law context, but
it is a critical one. Here, our review of the final rule in question is to proceed along two
tracks: the first can be described as generally procedural, the other substantive.
The first track is defined by the traditional standards set forth in the
Administrative Procedure Act (APA). See Chrysler Corp. v. Dep’t of Transp., 472 F.2d
659, 670 (6th Cir. 1972). Section 706 requires us to uphold agency action unless it is
“arbitrary, capricious, an abuse of discretion, or otherwise not in accordance with law.”
5 U.S.C. § 706(2)(A). This inquiry is principally concerned with the agency
decisionmaking process. It is a familiar refrain that the process is considered arbitrary
and capricious if
the agency has relied on factors which Congress has not intended it to
consider, entirely failed to consider an important aspect of the problem,
offered an explanation for its decision that runs counter to the evidence
before the agency, or is so implausible that it could not be ascribed to a
difference in view or the product of agency expertise.
Motor Vehicle Mfrs. Ass’n of U.S., Inc. v. State Farm Mut. Auto. Ins. Co., 463 U.S. 29,
43 (1983). The arbitrary-and-capricious standard is a narrow one inasmuch as we are
“not to substitute [our] judgment for that of the agency.” Id. Instead, our role is limited
to reviewing the administrative record “to determine whether there exists a ‘rational
connection between the facts found and the choice made.’” Alliance for Cmty. Media
v. F.C.C.,
529 F.3d 763, 786 (6th Cir. 2008) (quoting State Farm, 463 U.S. at 43). The
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 9
facts found, of course, must be supported by substantial evidence in the record as a
whole. Chrysler, 472 F.2d at 668; see also State Farm, 463 U.S. at 44. Put another way,
our role under the arbitrary-and-capricious standard is to ensure that NHTSA “complied
with all applicable procedural requirements” in making its decisions. Chrysler, 472
F.2d at 671 (emphasis added).
The second track is defined by the statutory limitations set forth in the Safety Act
itself, which is the source of NHTSA’s grant of authority to promulgate standards for
newly manufactured vehicles. Importantly, the grant is conditioned upon standards that
“shall be practicable, meet the need for motor vehicle safety, and be stated in objective
terms.” 49 U.S.C. § 30111(a). We have characterized these factors as the “minimum
substantive criteria against which each . . . standard must be tested.” Chrysler, 472 F.2d
at 668. Whether or not a standard passes the statutory test is an inquiry distinguishable
from traditional arbitrary-and-capricious review. Id. at 671. Our focus here is
principally substantive rather than procedural. Still, under the APA, a final rule that
conflicts with the language of the statute relied upon by the agency is considered “not
in accordance with the law.” City of Cleveland v. Ohio, 508 F.3d 827, 838 (6th Cir.
2007); see 5 U.S.C. § 706(2)(A).
While both of these standards of review are premised on deference, it is
important to be clear about the particular brand of deference. To that end, this case is
not one in which the Chevron analytical framework controls—notwithstanding
NHTSA’s assertion to the contrary. See Chevron U.S.A. Inc. v. Natural Res. Def.
Council, Inc., 467 U.S. 837 (1984). The Chevron framework is generally appropriate
for use when an agency’s authority to act under a statute is questioned. See id. at 842-
45; see also Arent v. Shalala,
70 F.3d 610, 615 (D.C. Cir. 1995). Such a dispute often
manifests as competing interpretations of the statutory text demarcating the bounds of
Congress’s delegation to the agency. Arent, 70 F.3d at 615. But it is hardly
controversial that the Safety Act authorizes NHTSA to promulgate a safety standard
regulating roof crush resistance in certain vehicles. See 49 U.S.C. § 30111. Nor do the
parties dispute the proper meaning of the text of the Safety Act. What is ultimately in
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 10
doubt is whether NHTSA discharged its delegated authority in a justifiable manner. And
we review that question under the standards set forth in the APA and State Farm. See
Arent, 70 F.3d at 615-16.
In the instant petition, we are thus presented with three broad questions for
decision—some easier to answer than others. (1) Was the process by which NHTSA
promulgated FMVSS No. 216a arbitrary and capricious, or did NHTSA conduct its
rulemaking proceedings in a sufficiently thorough manner? (2) Setting aside the
decisionmaking process, does FMVSS No. 216a fall short of the minimum substantive
criteria prescribed in the Safety Act, or does it satisfy all three? (3) Finally, did NHTSA
improperly delegate its statutory authority as part of FMVSS No. 216a? We answer each
question in turn.
III.
The first question is essentially a procedural one. We must ask whether NHTSA
conducted the rulemaking proceeding that resulted in the adoption of FMVSS No. 216a
in accordance with the APA’s procedural requirements. Our review is limited by the
narrow scope of the petition, concerning only the decision to regulate final-stage
manufacturers and alterers. After canvassing the record, we are satisfied that the agency
decisionmaking process was adequate.
Under the APA, we have the power to set aside agency action if it is “arbitrary
and capricious.” 5 U.S.C. § 706(2)(A). Here, our review turns in part on whether
NHTSA amassed sufficient record evidence to support its conclusions. See State Farm,
463 U.S. at 43-44. Our review turns in other part on whether NHTSA properly relied
on the factors Congress intended it to consider when promulgating a new safety
standard. See id. at 43. These factors are clearly articulated in the Safety Act. Congress
directed NHTSA to consider the “relevant available motor vehicle safety information”;
“whether [the] proposed standard is reasonable, practicable, and appropriate for the
particular type of motor vehicle”; and “the extent to which the standard will carry out”
the purposes of the Safety Act. 49 U.S.C. § 30111(b). These factors underscore the
notion that “[t]he Safety Act’s mandate is not . . . categorical,” Ctr. for Auto Safety v.
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 11
Peck, 751 F.2d 1336, 1343 (D.C. Cir. 1985), as the Act does not contemplate the
elimination of all accidents or injuries, only those that are “unreasonable.” See 49
U.S.C. § 30102(a)(8); S. Rep. No. 89-1301, at 2714 (1966) (noting that the Secretary
“will necessarily consider reasonableness of cost, feasibility and adequate lead time”).
Nonetheless, Congress has maintained that “safety shall be the overriding consideration”
in the regulatory calculus. S. Rep. No. 89-1301, at 2714.
Turning now to the record, it seems obvious to us that NHTSA promulgated the
final rule at issue only after engaging in an exhaustive and well-considered
decisionmaking process. We begin with the evidence. NHTSA compiled multiple
studies and reports “indicat[ing] that a significant number of serious and fatal injuries
occur during rollovers of light trucks”—a class of vehicles including multi-stage and
altered trucks with a GVWR up to 10,000 pounds—and that many of those injuries could
be attributed to roof crush. See 70 Fed. Reg. at 49,232-34 (finding that “412 belted, not
fully ejected occupants are killed or seriously injured every year in light trucks” with a
GVWR between 6,001 pounds and 10,000 pounds “involved in rollover crashes resulting
in roof intrusion”); see also id. at 49,228 (noting that heavier vehicles experience higher-
than-usual roof crush). NHTSA also connected the rollover problem in heavier vehicles
with occupant safety. Specifically, NHTSA found that extending the scope of the roof
crush resistance standard to include heavier vehicles would help “prevent 135 fatalities
and 1,065 nonfatal injuries annually.” 74 Fed. Reg. at 22,349. All of which goes to
show that NHTSA amassed sufficient evidence of a problem and moved to enact a
reasonable solution.
In addition, we have little doubt that NHTSA weighed the proper factors in
crafting this solution—one part of which was to extend the reach of the roof crush
resistance standard to heavier vehicles. The record attests to NHTSA’s sensitivity to
manufacturers’ concerns about demonstrating compliance with the upgraded standard.
See, e.g., 70 Fed. Reg. at 49,234. The record also attests to NHTSA’s desire to seek a
workable balance between such concerns and Congress’s “overriding” interest in safety.
Among other things, NHTSA exempted multi-stage vehicles “where the final-stage
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 12
manufacturer would need to complete the roof structure,” see 76 Fed. Reg. at 15,910;
allowed all multi-stage vehicles not built on chassis-cabs to certify to an easier standard,
see id. at 15,908; and modified the test in FMVSS No. 216a to avoid any compression
of the frame rails, see id. at 15,918-19. Moreover, NHTSA made these concessions after
engaging in an extensive dialogue with groups of all stripes, including NTEA. We do
not think the APA or State Farm compel anything more from the decisionmaking
process.
NTEA disagrees and raises two objections that we view as inherently procedural.
First, NTEA charges that NHTSA “did not even bother to test multi-stage or altered
vehicles” at any point in the process. But NHTSA did perform a roof strength test on
a chassis-cab prior to adopting FMVSS No. 216a. See 76 Fed. Reg. at 15,918 n.77;
75 Fed. Reg. at 17,602 & n.53 (noting that NHTSA’s test of a single-stage pickup truck
would have sufficed because an attached bed does not affect roof strength). This
objection misses the mark in any event. NTEA fails to identify statutory authority for
the so-called testing requirement and similarly fails to explain adequately how testing
might undermine the overwhelming record evidence supporting NHTSA’s decision to
regulate heavier vehicles.
Second, NTEA charges that NHTSA did not sufficiently consider whether the
supposedly unique attributes of multi-stage and altered vehicles justified exemption from
the roof crush resistance standard. This objection is based on NHTSA’s Final
Regulatory Impact Analysis (FRIA)—conducted in accordance with Executive Order
12,866—in which the agency found that injury-causing rollovers appear to affect multi-
stage and altered vehicles at relatively lower rates and speculated that factors like
frequent use at job sites and operation in low-speed environments might explain why.
But NTEA’s focus on the FRIA is misplaced. Executive Order 12,866 does not create
judicially enforceable rights, nor does it provide a basis for rejecting final agency action.
See §10, 3 C.F.R. 638, 649 (1993). Regardless, NHTSA did consider whether to apply
the upgraded standard to all vehicles within the newly regulated weight class or whether
to exempt multi-stage and altered work trucks. The agency found that the latter class of
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 13
vehicles was not categorically immune from rollovers and roof crush—reasonably
refusing to make the same inferential leap as did NTEA based on the FRIA. See 74 Fed.
Reg. at 22,373.
So, to recap, we conclude that NHTSA conducted a more-than-adequate
investigation and reached a reasonable decision based on the results of that investigation.
There is ample evidence in the record showing a connection between the problem of
injuries resulting from roof crush during rollovers of heavier vehicles, including multi-
stage and altered vehicles, and the solution put forth in FMVSS No. 216a. In the end,
we must defer to the agency when it has engaged in such an involved process. Congress
entrusted NHTSA with an important proactive regulatory mission, and it is not our role
in the institutional scheme of things to make that mission unnecessarily difficult to
accomplish. Indeed, the agency’s job is to promulgate standards and ours is simply to
ensure that it does so responsibly. To ask for more process in a situation like this would
render NHTSA’s standard-setting mission a practical impossibility. Because that is not
what Congress had in mind when it passed the Safety Act, we decline to do so here.
IV.
Our review does not end with the determination that NHTSA followed the APA’s
procedural requirements. This case presents a second question for decision, which is
essentially a substantive one. We must ask whether FMVSS No. 216a complies with the
“statutory limitations” of the Safety Act. Chrysler, 472 F.2d at 669. There are three
relevant limitations—or “minimum substantive criteria.” Congress specified that any
new safety standard “shall be practicable, meet the need for motor vehicle safety, and
be stated in objective terms.” 49 U.S.C. § 30111(a). NTEA argues that FMVSS No.
216a falls short on all three counts. We disagree.
A.
NTEA’s principal argument is that FMVSS No. 216a is not “practicable” within
the meaning of the Safety Act. Our guidance on this issue comes from a prior case
involving these very same parties, in which we held that a safety standard is practicable
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 14
only if it “offer[s] the regulated party a chance to demonstrate compliance.” Nat’l Truck,
919 F.2d at 1153. NTEA says that FMVSS No. 216a does not. It argues that performing
the prescribed test is too costly for its members and that pass-through certification is
inherently unworkable for multi-stage vehicles as a general matter. This line of
argument is hardly novel: NTEA has made it in one form or another throughout the
rulemaking proceeding, as well as in other rulemaking proceedings going back decades.
We must decide whether the argument has any merit here—in other words, whether
FMVSS No. 216a offers final-stage manufacturers and alterers a fair shot to demonstrate
compliance via pass-through certification or other means. We think that it does.
We begin with some background. Most manufacturers can demonstrate
compliance with FMVSS No. 216a by conducting the dynamic test prescribed in the
standard itself. See 49 C.F.R. § 571.216a, S5-7. We do not doubt that this test is stated
in objective terms and can be repeated. But NTEA and NHTSA agree that conducting
the test is not a realistic option for final-stage manufacturers and alterers for other
reasons. As small businesses with a fraction of the financial and engineering resources
available to major manufacturers like Ford and GM, the cost of independently certifying
is prohibitive. See Nat’l Truck, 919 F.2d at 1154-55. Final-stage manufacturers and
alterers cannot afford to produce vehicles for the sole purpose of crushing roofs,
something the test requires. See 49 C.F.R. § 571.216a, S7. Their compliance difficulties
are only exacerbated by the fact of limited production runs. In extreme cases, a
final-stage manufacturer or alterer might have to produce two vehicles just to sell one.
(A major manufacturer, on the other hand, can spread the cost of testing across
thousands of vehicles in a particular model line.) The upshot is that final-stage
manufacturers and alterers need an alternative avenue for demonstrating compliance.
For final-stage manufacturers, NHTSA says that pass-through certification is the
solution to their compliance problem—and we agree. It is clear from the record that
final-stage manufacturers certifying to the upgraded roof crush resistance standard may
rely on documentation provided by initial manufacturers, see 76 Fed. Reg. at 15,904-06,
15,913-16, just as Congress envisioned, see 49 U.S.C. § 30115. Significantly, NHTSA
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 15
noted that most chassis-cabs would arrive with Type 1 or Type 2 (IVD) statements
regarding FMVSS No. 216a, and final-stage manufacturers would be able to conform
to the listed conditions because the attachment of cargo-carrying or load-bearing
equipment to bare frame rails has no obvious effect on roof strength in the cab. See 76
Fed. Reg. at 15,912-13. We know this to be true from years of practice and the
accumulation of agency expertise in administering the existing roof crush resistance
standard. See id. at 15,911; 75 Fed. Reg. at 17,593, 17,602-03. Indeed, manufacturers
of multi-stage vehicles with a GVWR of 6,000 pounds or less have been taking
advantage of pass-through certification to successfully comply with FMVSS No. 216
since 1991. See 75 Fed. Reg. at 17,599. And manufacturers who truly cannot take
advantage of pass-through certification are exempted in the final rule. See 74 Fed. Reg.
at 22,349. Thus, we see no compelling reason why the upgraded roof crush resistance
standard would render pass-through certification inherently unworkable.
An additional virtue of pass-through certification is that it does not come at a
prohibitive cost, quite unlike testing. We owe considerable deference to NHTSA’s well-
informed predictive judgment that the availability of pass-through certification means
final-stage manufacturers will not face substantially higher compliance costs as a
consequence of the upgraded standard. See Cellnet Commc’ns, Inc. v. F.C.C., 149 F.3d
429, 441 (6th Cir. 1998); see also Public Citizen, Inc. v. Nat’l Highway Traffic Safety
Admin.,
374 F.3d 1251, 1260-61 (D.C. Cir. 2004) (deferring to a NHTSA prediction on
the basis that it was a policy judgment best left to the agency). Because this judgment
“is within the agency’s field of discretion and expertise,” we are required to treat it
favorably, even though a predictive judgment, by its nature, “cannot necessarily be
proved by the record.” Cellnet, 149 F.3d at 441 (“This deference has been explained as
deriving from the fact that such judgments tend to be infused with policy considerations
that are not appropriate for close judicial scrutiny.”). It goes some distance toward
convincing us that pass-through certification is a practicable solution to the compliance
problem NTEA complains of here.
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 16
NTEA pushes back against this conclusion with two arguments—neither of
which sways us. First, NTEA contends that pass-through certification is no solution at
all for final-stage manufacturers because it is “not viable” as a general matter. Its
allegedly fatal flaw is that self-interested initial manufacturers dictate the terms of
compliance; under the Safety Act’s certification scheme, initial manufacturers have
every incentive to draw up the most restrictive IVDs possible, thereby pushing much of
the burden of certification (and risk of liability for failing to comply with applicable
standards) onto final-stage manufacturers. See Nat’l Truck, 919 F.2d at 1155. Final-
stage manufacturers complain that they exceed the bounds of these IVDs the second they
go to work on a chassis-cab and cannot take advantage of pass-through certification as
a result. This problem might warrant additional discussion if it found any support in the
record. But whatever questions regarding pass-through certification may exist in theory
have been answered by NHTSA’s experience in practice. See 75 Fed. Reg. at 17, 599
(noting that final-stage manufacturers have been using the pass-through method to
certify compliance with various safety standards for decades). NTEA’s fears regarding
too-restrictive IVDs appear to us unfounded. In any event, final-stage manufacturers
remain free to tell dealers and customers that they will only work on chassis-cabs from
initial manufacturers who provide accommodating IVDs.
Second, NTEA cites two federal appellate court decisions setting aside safety
standards for failing to satisfy the practicability criterion and argues that their logic
compels a similar result here. The first is Paccar, Inc. v. National Highway Traffic
Safety Administration, 573 F.2d 632 (9th Cir. 1978), in which an association of final-
stage manufacturers successfully challenged a NHTSA standard regulating brake
systems. Id. at 634-35. The court held that manufacturers were “entitled to testing
criteria that they can rely upon with certainty” in demonstrating compliance with the
standard, meaning “formal and reasonably specific . . . criteria.” Id. at 644-45. The
second decision is one of our own, in which NTEA sought review of a NHTSA standard
regulating steering column displacement based on virtually identical practicability
concerns. See Nat’l Truck, 919 F.2d at 1149-50. We held that a valid safety standard
must provide a “realistic way for the final-stage manufacturers to comply with it and
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 17
thereby meet their duty to certify the safety of the vehicle.” Id. at 1155. Because the
displacement standard did not provide a non-testing certification option for all final-
stage manufacturers, we set aside the standard as impracticable as applied to those
“final-stage manufacturers that cannot pass through the certification of the initial
manufacturer.” Id. at 1158. NTEA claims that these decisions taken together require
NHTSA to provide some alternative method for final-stage manufacturers to demonstrate
compliance with FMVSS No. 216a.
But this claim does not stand up to scrutiny. NTEA fails to note that Paccar
contains nary a word about pass-through certification, a fact that renders it largely
inapposite. For our purposes, Paccar simply establishes that NHTSA must provide a
reasonably definite method for manufacturers to certify compliance. See 573 F.2d at
644-45. And pass-through certification fits the bill. While our decision in the prior case
between these parties is arguably on-point, it is not the silver bullet NTEA makes it out
to be. There, we actually upheld the standard at issue as it applied to manufacturers able
to pass through the certification of the initial manufacturer, a group that included final-
stage manufacturers of vehicles built on chassis-cabs. See Nat’l Truck, 919 F.2d at 1158.
Having accepted the basic premise that pass-through certification is workable, see id.,
it is significant that the method has been made available to all final-stage manufacturers
subject to the upgraded roof crush resistance standard. In the end, these two decisions
are little more than reminders that NHTSA must carefully consider the unique problems
facing final-stage manufacturers and must ultimately provide them with a formal and
definite method to demonstrate compliance with any new safety standard. We are
satisfied that NHTSA has done both here.
For alterers, it is a different story entirely. Alterers cannot even nominally avail
themselves of pass-through certification because they modify already-completed single-
stage vehicles that do not arrive from the manufacturer with an IVD attached. However,
for the very same reason that pass-through certification is not an option, alterers do not
need any non-testing option at all. Alterers do their work on vehicles already certified
under the Safety Act. See 49 C.F.R. § 567.3. Single-stage manufacturers are required
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 18
to take the greater step of certifying compliance with applicable standards, see 49 U.S.C.
§ 30115(a), which is precisely why they do not take the lesser step of issuing an IVD.
Alterers need not certify independently so long as they do not make the kind of changes
that affect roof strength, see 76 Fed. Reg. at 15,905 & n.11, and most alterers work on
the rear of a vehicle, away from the cab. Even those that attach aftermarket parts to the
cab rarely do so in a manner that compromises the strength of the roof pillars or roof
materials. As with final-stage manufacturers and pass-through certification, the current
regime reflects a status quo in which alterers have been successfully complying with
existing FMVSS No. 216 for years. See id. at 15,905-06. Thus, we have no reason to
doubt that the upgraded standard offers alterers a similarly fair shot at demonstrating
compliance.
In sum, we conclude that FMVSS No. 216a is “practicable” within the meaning
of the Safety Act because it provides final-stage manufacturers and alterers with
reasonable means of demonstrating compliance. To conclude otherwise would disregard
Congress’s instruction to put a thumb on the scale for safety in considering the
substantive limitations of the Act. See Public Citizen, Inc. v. Mineta, 340 F.3d 39, 58
(2d Cir. 2003). After all, Congress intended for manufacturers to adjust to the regulatory
demands of the industry rather than the other way around. Cf. Chrysler, 472 F.2d at 671
(describing the Safety Act as technology-forcing legislation). Where there are seemingly
definite and formal means for manufacturers to demonstrate compliance, as here, we
ought not “second-guess the ‘practicability’ determination of an agency charged with the
responsibility of studying and developing safety standards through an involved
fact-finding process.” Nat’l Truck, 919 F.2d at 1159 (Guy, J., dissenting).
B.
That brings us to the two remaining substantive criteria. The Safety Act specifies
that all safety standards must “meet the need for motor vehicle safety” and must be
stated in “objective terms.” 49 U.S.C. § 30111(a). NTEA says that FMVSS No. 216a
comes up short in both respects, at least as applied to final-stage manufacturers and
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 19
alterers. In addressing NTEA’s claims, our discussion focuses on the record and thus
tends to overlap with our procedural review at the margins.
NTEA’s first contention—that “NHTSA did not establish a safety need” for
extending the scope of the roof crush resistance standard to include vehicles with a
GVWR up to 10,000 pounds—is contradicted by the record. As we discussed earlier,
NHTSA identified a general “rollover problem” in which roof crush plays a substantial
role. See 70 Fed. Reg. at 49,226-29 (noting that roof crush during rollovers contributes
to more than one thousand serious and fatal injuries every year). In addition, NHTSA
found that heavier trucks not subject to existing FMVSS No. 216, multi-stage and altered
vehicles among them, were a conspicuous part of the problem. Id. at 49,233. Finally,
NHTSA produced evidence showing that its proposed changes would “prevent
135 fatalities and 1,065 nonfatal injuries annually.” 74 Fed. Reg. at 22,349; see also
70 Fed. Reg. at 49,233 (estimating that applying the standard to vehicles with a GVWR
between 6,001 pounds and 10,000 pounds would prevent at least 129 of those fatalities
and serious injuries). This evidence strikes us as sufficient alone to prove that FMVSS
No. 216a meets a safety “need.”
We also think it worth noting that NHTSA promulgated FMVSS No. 216a
pursuant to a specific congressional mandate. See 49 U.S.C. § 30128(a); see also id.
§ 30128(d) (directing NHTSA to initiate a rulemaking proceeding to “upgrade [FMVSS]
No. 216 relating to roof strength for driver and passenger sides”). Nothing suggests that
the mandate was conditioned upon a finding that heavier vehicles experience rollovers
at a greater rate than vehicles subject to the existing standard. As Congress made clear,
the occupants of heavier vehicles, including multi-stage and altered vehicles, are equally
entitled to the safety benefits secured by an upgraded standard. See 76 Fed. Reg. at
15,919. Thus, the “need” requirement in the Safety Act cannot be said to prohibit
NHTSA from acting as it did in this instance.
Likewise, NTEA’s second contention—that NHTSA failed to provide an
“objective method” by which final-stage manufacturers and alterers can demonstrate
compliance with the upgraded standard—is unavailing. There is no question that the
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 20
dynamic test prescribed in FMVSS No. 216a is set forth in sufficiently objective terms.
See 49 C.F.R. § 571.216a, S5.1. And this test forms the basis for certifying that any
particular vehicle complies with the upgraded standard. Pass-through certification is
only available to a final-stage manufacturer working on a multi-stage vehicle because
the initial manufacturer properly tested the chassis-cab prior to delivering it. We thus
conclude that FMVSS No. 216a is “objective” within the meaning of the Safety Act.
V.
The final question for review differs in nature from the prior two. We must
decide whether pass-through certification, as incorporated in FMVSS No. 216a,
constitutes an improper delegation of NHTSA’s statutory duties. Specifically, NTEA
argues that initial manufacturers are exercising agency powers when they write IVDs
without oversight because the terms of these IVDs dictate whether final-stage
manufacturers can meet their duty to certify compliance with applicable safety standards.
We are not convinced.
Under U.S. Telecom Association v. F.C.C., 359 F.3d 554 (D.C. Cir. 2004),
agency “subdelegations [of statutory powers] to outside parties are assumed to be
improper absent an affirmative showing of congressional authorization.” Id. at 565.
From this premise, NTEA concludes that NHTSA has used pass-through certification
as a way to avoid promulgating a safety standard that is practicable and objective. But
NTEA misunderstands the improper delegation doctrine on several levels. Most
fundamentally, NTEA fails to specify any particular power, conferred on NHTSA by
Congress, that the agency has turned around and actively delegated to initial
manufacturers. NHTSA quite clearly promulgated FMVSS No. 216a. In addition,
unregulated IVDs do not impermissibly reallocate the statutory division of responsibility
for certifying compliance. Congress in fact explicitly endorsed the pass-through
certification regime in 2000. See 49 U.S.C. § 30115(b)(1). Allowing initial
manufacturers to write their own IVDs is not the same thing as allowing them to pass off
their risk of liability onto helpless final-stage manufacturers. Thus, we conclude that
NHTSA has not improperly delegated its statutory duties.
No. 09-3812 Nat’l Truck Equip. Ass’n v. NHTSA Page 21
VI.
For the foregoing reasons, we reject NTEA’s challenges to FMVSS No. 216a and
deny the petition for review.
