WILLIAM T. HART, District Judge.
Class action plaintiff Keith Baxter alleges that he purchased a new 2006 Kawasaki Vulcan Nomad 1600 motorcycle (the "Vulcan") that has an odometer which overstates the miles actually ridden. Named as defendants are Kawasaki Motors Corp., U.S.A. ("KMC"), Kawasaki Heavy Industries, Ltd. ("KHI"), and Does 1-3.
In Counts I and II of the Second Amended Class Action Complaint, plaintiffs allege violations of the federal Odometer Act, 49 U.S.C. §§ 32703(1)-(2). This court has jurisdiction over Odometer Act claims. 28 U.S.C. § 1331; 49 U.S.C. § 32710(b).
Section 32703 provides in part:
A person may not —
Count III of the Second Amended Complaint alleges a violation of 49 U.S.C. § 32705(a)(1) of the Odometer Act, which requires written disclosure of the cumulative mileage registered on an odometer at the time of certain transfers of ownership.
It was held that the First Amended Complaint stated no cognizable violations of these statutory provisions because named plaintiff alleged only that the odometer installed by the manufacturer was defective. There were no allegations of altering an already manufactured or installed odometer, and the transfer of ownership by the manufacturer in a manufacturer-dealer transaction does not require a mileage disclosure statement. See Baxter v. Kawasaki Motors Corp., U.S.A., 2008 WL 8901361 *4-6 (N.D.Ill. July 17, 2008) [Docket Entry 41] ("Baxter I").
Thereafter, named plaintiff was permitted to file a Second Amended Complaint because it contained, in Counts I and II, allegations that, after manufacture, a software device was added to the odometer or that the odometer was otherwise altered. See Order dated Aug. 20, 2008 [Docket Entry 50], However, Count III of the Second Amended Complaint alleged the same disclosure-statement violation of § 32705(a)(1) of the Odometer Act as stated in the First Amended Complaint. Count III was dismissed at the same time leave was granted to filed the Second Amended Complaint. Id. See also Baxter I, 2008 WL 8901361 at *5-6.
On September 1, 2009, a class was certified consisting of: "All persons and entities who/which purchased or leased a new Kawasaki Vulcan Nomad 1600 or Vulcan Classic 1600 motorcycle, model years 2005 through 2009, anywhere in the United States on or after November 30, 2005 and no later than December 31, 2008." Excluded from the Class were defendants and their parents, predecessors, successors, subsidiaries, and affiliates. Baxter v. Kawasaki Motors Corp., 259 F.R.D. 336,
After extensive discovery, the case is now before the court on defendant KHI's motion for summary judgment.
Outlaw, 259 F.3d at 837.
It is undisputed that the Vulcan was designed and manufactured by KHI and imported and distributed by KMC. Plaintiffs contend the odometers overstate mileage by approximately 1.75%. Approximately one-third of this mileage overstatement results from the mathematical rounding used to convert metric into statute miles. KHI uses a 1.6 conversion rate instead of a 1.60934 conversion rate suggested by plaintiffs, which results in an approximately 0.6% difference in registered miles; that is, if 1.60934 had been used, the overstatement would have instead been 1.15%. Stated otherwise, using the additional decimals would have resulted in a decreased overstatement of approximately 60 miles per every 10,000 miles driven.
The National Institute of Standards and Technology ("NIST"), a division of the U.S. Department of Commerce with statutory responsibility for promoting and maintaining measurement laws, has a publication entitled The International System of Units (SI) — Conversion Factors for General Use, NIST Special Pub. 1038 (2006). It lists a 6-decimal conversion rate for kilometers to miles, 1.609344. Id. § 5.1.3. It is stated that "it is good practice to keep all of the digits, especially if other mathematical operations or conversions will follow. Rounding should be the last step of the conversion process and should be performed only once." Id. § 4.4. See also NIST Handbook 44 (Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices) App. A, § 10 (2012) (rounding). Still, in doing rounding, "it is important to establish the purpose of rounding and the application that it will be used in." NIST Special Pub. 1038 § 4.4.1. As noted, though, even if it would have been better practice to have used 5 — or even 6 — decimal points, the difference between that and using 1.6 is only a 0.6% overstatement, which is 60 miles for every 10,000 actually driven.
The electronic odometer was manufactured for KM by the firm of Nippon Seiki according to specifications provided by KM. KM assembles the as-built odometer without any alteration, modification, or change in the odometer, including software. The specification provided by KM
The odometer operates as follows. The output shaft from the motorcycle's transmission has a 15-tooth gear. As the output shaft turns, it turns the rear wheel. As the rear wheel turns, a speed sensor attached to the output shaft registers an electronic pulse for each passing tooth on the 15-tooth gear. When a specified number of pulses are detected, based on the pulse rate specification (44,032), the information is transmitted into an electronic chip in the odometer. The odometer then indicates that the motorcycle has travel one mile. The number of pulses specified by KHI is programmed by Nippon Seiki into a non-volatile memory chip assembled into circuit hardware and inserted into the odometer.
Another description of the operation of the electronic speedometer/odometer is as follows. A beveled gear with 15 teeth mounted in the final drive assembly turns the drive shaft. The drive shaft turns approximately 3.677 times for each rotation of the tire. As the beveled gear turns, a sensor located near the teeth detects magnetic flux changes as each tooth passes and generates an output pulse corresponding to each tooth. The pulse-train is transmitted via the wiring harness to the speedometer/odometer instrument mounted in front of the driver. The speedometer/odometer instrument electronic circuit conditions the signal and supplies it to a microprocessor. The microprocessor counts the number of pulses received over a defined time period, as short as 0.01 seconds. This generates a count per unit time. The count is used to calculate speed and distance traveled. The distance value is stored in the non-volatile memory chip.
Odometers do not precisely measure and display the exact distance a vehicle has traveled. Variations in the radius of the tire (and the margin of error or tolerance), gear ratio, air pressure, wear, speed, heat, load, driving conditions, weather conditions, and driver behavior have been recognized as having an effect on mileage registration.
KM has adopted ±4% as the designed tolerance of the odometer. All of the test data that has been collected by the parties' experts has demonstrated that the odometer displays a mileage distance within ±4%. There are no federal laws or regulations requiring odometers to be designed or manufactured to perform within a certain degree or percentage of accuracy. However, automotive industry standards and guidelines recommend an acceptable range of ±4% for odometer accuracy.
As the court found in In re Nissan N. Am., Inc., Odometer Litig., 2010 WL 3852722 *1 n. 2 (M.D.Tenn. Sept. 28, 2010), the Society of Automotive Engineers International ("SAE") has recommended an acceptable range of accuracy which is followed by the industry. SAE Surface Vehicle Recommended Practice J678 (Speedometers and Tachometers-Automotive) § 3.3.3 (Dec. 1988), specifies an accuracy of ±4% of actual distance traveled. SAE Surface Vehicle Information Report J862 (Factors Affecting Accuracy of Mechanically Driven Automotive Speedometers-Odometers) § 4.1.2 (Jan. 1989), specifies an accuracy of ±4% of actual distance traveled. SAE Surface Vehicle Recommended Practice J1226 (Electric Speedometer Specification — On Road) §§ 5.1, 5.2 (Feb. 1983), specifies an accuracy of ±4% of actual distance traveled for speeds
For a few years, the National Highway Traffic Safety Administration ("NHTSA") had regulations requiring that odometers be tamper-resistant and be accurate within ±4%. Those regulations, however, were promulgated under the National Traffic and Motor Vehicle Safety Act ("Safety Act"), not the Odometer Act, and were completely rescinded in 1982 because they did not have a safety benefit as is necessary for Safety Act regulations. See Nissan, 2010 WL 3852722 at *6. In 1980, motorcycles were excluded from then-existing anti-tampering provisions "in response to comments which pointed out that motorcycles have a relatively short useful life (approximately 7,400-18,600 miles) and that buyers of used motorcycles rely more heavily on inspection of the vehicles than on odometer readings in ascertaining the condition of the vehicles." 45 Fed. Reg. 40585, 40588-89 (June 16, 1980).
NIST has standards for odometers that are used to determine charges on vehicles that are rented or for hire. Such standards do not directly apply to the Vulcan since that was not a vehicle that was rented. Still, it is instructive that NIST recommends that "maintenance and accepted tolerances on odometers shall be 4% of the interval under test." See NIST Handbook 44 § 5.53, T.2 (2012).
Both sides' experts measured the accuracy of odometers on a selection of Vulcan motorcycles. No odometer under-registered. All odometers over-registered less than 4% or approximately 1.75%.
Plaintiffs do not directly allege that the odometer was defectively designed. Plaintiffs contend that the electronic odometer is capable of operating within a much lower tolerance: as little as ±0.3, according to plaintiffs' experts. Plaintiffs contend the Odometer Act was violated by altering or installing a software device (the pulse rate and the memory chip on which the pulse rate was programmed) into the odometer causing it to register more miles than the Vulcan is actually driven. Plaintiffs suggest that the memory chip is a device which was installed to alter the odometer. But there is no evidence that KHI made any change in the odometer supplied by Nippon Seiki. Nor can it be found that the chip was not part of the original unit.
The Odometer Act was adopted to prevent third parties from tampering with odometers. It was intended to apply to post-manufacture tampering with odometers. This court, Baxter I, 2008 WL 8901361 at *4-5, and the court in Nissan, 2010 WL 3852722 at *5-8, have so held.
Plaintiffs argue that the "manufacturer's tolerance rate" referred to in § 32703(1) is not relevant because Nippon Seiki is the manufacturer of the odometer and it has no declared tolerance rate for the odometer. The Nissan court rejected this same argument See 2010 WL 3852722 at *5 n. 6. This argument ignores that the odometer/speedometer is a component that was specified by the manufacturer and connected to a sensory system.
It is undisputed that the accuracy of the Vulcan odometer may be impacted over time due to factors KHI cannot control. Plaintiffs argue, however, based on SAE literature that suggest a ± 0.3 possible accuracy for a new mechanical odometer that KHI should have adopted a pulse rate for the Vulcan electronic odometer that would nominally produce such accuracy. This is an argument for the adoption of a different standard by the SAE or the NHTSA. But it is not a position that presents a triable issue of fact that could be considered by a jury or by this court based on the Odometer Act.
Section 32710(a) of the Odometer Act provides that a person that violates the Act "with intent to defraud" may be liable under the Act's civil remedies. Intent to defraud is a necessary element of an Odometer Act claim. Jones v. Hanley Dawson Cadillac Co., 848 F.2d 803, 806 (7th Cir.1988); Ioffe v. Skokie Motor Sales, Inc., 414 F.3d 708, 711-12 (7th Cir.2005); Bodine v. Graco, Inc., 533 F.3d 1145, 1150-51 (9th Cir.2008). The design of an odometer within a manufacturer's tolerance range cannot support an inference of fraud. Compare Diersen v. Chicago Car Exch., 110 F.3d 481, 488 (7th Cir.1997) (inaccurate disclosure statement by itself is not a basis for inferring intent to defraud). Failure to present facts supporting a genuine factual dispute regarding intent is another basis for granting summary judgment.
Except with respect to emission systems, KHI's motorcycle owner's service warranty system is based on calendar time (24 months from the date of purchase) not on mileage. The emission system component warranty is 18,641 miles (30,000 km). There is no evidence of the repair rate of any emission systems over the life of any Vulcan. No facts suggest that any owner has experienced costs or actual damage because of mileage registration. In other words, there is no evidence that defendant benefits from overstated mileage, which is further support that defendant had no intent to defraud. Cf. Tellabs, Inc. v. Makor Issues & Rights, Ltd., 551 U.S. 308, 325, 127 S.Ct. 2499, 168 L.Ed.2d 179 (2007).
Plaintiffs' claims fail on their merits. The entire case as against all defendants will be dismissed with prejudice.
IT IS THEREFORE ORDERED that defendant's motion to strike [248] is denied. Defendant's motion for summary judgment [232] is granted. The Clerk of the Court is directed to enter judgment in favor of defendants and against plaintiffs dismissing plaintiffs' cause of action with prejudice.